คัดกรอง
IKD 1 Digital I/O Expansion Board

IKD 1 Digital I/O Expansion Board

    The IKD 1 output relays are controlled over the CAN bus connection from the main genset controller. Configuration of the IKD 1 is performed through the relay manager in the main controller and transmitted to the IKD 1. A direct configuration cable (DPC) and software can be purchased for use with a PC or laptop and may be advisable for extensive configuration applications or where several similar units are to be set up.

    หมวดหมู่:

    The IKD 1 is a smart solution to increase numbers of digital I/O’s to Woodward easYgen and DTSC-200 series controllers. It is possible to connect one or more IKD 1 units to the power management controllers Each of the inputs can be assigned a name, alarm class, NO/NC configuration and time delay. The name and class are displayed on the connected genset controller’s display.

    1. 8 configurable discrete alarm inputs
    2. 8 configurable FORM C relays with potential free contacts
    3. Configurable delays for each input
    4. CAN bus communication
    5. The discrete inputs transfer their status via CAN bus to the control unit.
    6. The control unit evaluates the status of these discrete inputs coming from the IKD 1 and depending on the configuration of the control unit, will take the appropriate action.
    7. The control unit can send commands via the CAN bus to remotely control the output relays of the IKD 1.
    8. The IKD 1 can be used with other manufacturer’s controllers. Consult product manual 37135 for information regarding the address assignments of the CAN bus interface.